Author Topic: Cliff Barker Brass Track and Points  (Read 104 times)

0 Members and 1 Guest are viewing this topic.

Offline classicdelights

  • G3 Society Member
  • ***
  • Posts: 77
Cliff Barker Brass Track and Points
« on: November 10, 2018, 12:58:19 pm »
I have reluctantly decided that I will not build a layout in Pembrokeshire where I now live so am offering a large lot of Cliff Barker track and points at a considerable saving.  Any one planning to start on a large layout will have pretty much all they need in this lot.  I specifically wanted brass rail as I had quite a few problems with stainless steel rail in my Gauge 1 days, especially locos slipping which I find you do not get so much with brass rail.

The following is in the lot offered:

7   Q75 G3 6000mm Radius Point LH in Brass (made to order)
5   Q76 G3 6000mm Radius Point RH in Brass (made to order)
1   Q77 G3 6000mm Radius Point Y in Brass (made to order)
1   Q80 G3 Diamond Crossing (Special) in Brass (made to order)
240   T30 G3 1 Yard Ready Made Track, Brown Polypropylene, Brass Rail
        (78 yards is gauge widened – 162 yards is standard track)
9   T81 G3 Ready Made Buffer Stop Brass
5   F85 G3 Fishplates for c250 rail, ASA Plastic x 100
8   E11 G1 Super Elevation Wedge, ABS x 100
        also about 150 spare sleepers – just in case

The total came to over £6000.  All this is offered as new for £4500 including pallet delivery within mainland UK.  Some of the track was laid and then removed and repacked but none of it has been used for running so everything is in as-new condition.

Please email me for photos of the layout I started to build before moving, these show the configuration of the points and crossing.


Phil Flint

Offline Peaky 556

  • G3 Society Member
  • ***
  • Posts: 511
Re: Cliff Barker Brass Track and Points
« Reply #1 on: November 10, 2018, 09:22:47 pm »
Sorry to hear your Railway won’t come to fruition but hope it won’t stop you modelling.
If you haven’t already, other good places to advertise G3 track would be the two Facebook pages for Gauge 3 Railways and Gauge 3 Society, not forgetting our G3S website.
Good luck, Tim

Offline midnight miller

  • G3 Society Member
  • ***
  • Posts: 196
Re: Cliff Barker Brass Track and Points
« Reply #2 on: November 10, 2018, 11:23:47 pm »
Hello Phil

 Sorry that you are not going on with your layout . Reading your add , it's rather a large bundle . You may have more success splitting it in to 1/2 or 3rd's
All the best