Author Topic: Hasp and Staple  (Read 1653 times)

0 Members and 1 Guest are viewing this topic.

Offline Jon Nazareth

Hasp and Staple
« on: December 03, 2017, 06:29:40 PM »
Good evening all

Does anyone know of a supplier of a decently scaled hasp and staple?  I need a pair.

Jon

Offline MikeWilliams

Re: Hasp and Staple
« Reply #1 on: December 03, 2017, 10:26:14 PM »
Could you give a little more detail Jon?  I assume for a wagon?


Offline Jon Nazareth

Re: Hasp and Staple
« Reply #2 on: December 04, 2017, 05:52:51 PM »
Mike
Yes, they are for my brake van.  I have a couple that I bought from Model Timbers but, they are too long/big in general and therefore, I was wondering if there is anything else out there.

Jon

Offline MikeWilliams

Re: Hasp and Staple
« Reply #3 on: December 04, 2017, 10:30:46 PM »
These are the only ones I have Jon, plus the unequal LSWR hook.

Mike

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #4 on: December 05, 2017, 07:03:34 PM »
Nice fittings but what I want is the lock plate (hasp), for want of a better word, that would secure the two doors on my brake van.  One would attach a padlock through the staple to make it more secure.  Did you supply something like this for your LBSCR van?  Can't find my etches at the moment.

Jon

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #5 on: December 05, 2017, 07:11:31 PM »
Mike
Model Timbers calls the set that he markets a, Door Catch!

Jon

Offline MikeWilliams

Re: Hasp and Staple
« Reply #6 on: December 05, 2017, 08:27:38 PM »
Ah, sorry, I think you did use the right names the first time, but staple has many meanings!

No, I have nothing like that and those on van kits are cast in.  I suspect it might be a bit small, even for dolls house suppliers.

Mike

Offline John Candy

Re: Hasp and Staple
« Reply #7 on: December 05, 2017, 10:40:29 PM »
Jon,

This is a photo I have just taken of the pattern used to produce the LBSC van which Mike sells.

Is the hasp/staple the same shape as the one you require?

John
My fellow Members, ask not what your Society can do for you, ask what you can do for your Society.

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #8 on: December 06, 2017, 09:13:34 AM »
John

Yes, that's the one,  I didn't realise that it was cast in.

Jon

Offline John Candy

Re: Hasp and Staple
« Reply #9 on: December 06, 2017, 09:35:06 AM »
Jon,

If you can wait a week or two, I will see if I can produce as a "standalone" casting....it's far too cold in the garage at moment to do casting.

John.
My fellow Members, ask not what your Society can do for you, ask what you can do for your Society.

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #10 on: December 06, 2017, 12:34:46 PM »
John
That's very kind of you and yes, very cold outside and the wind doesn't make it any better.  My hand skills aren't that good but, I'm going to have a go at filing one up and I'll let you know how I get on with that before taking you up on your offer.

Jon

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #11 on: January 19, 2018, 06:09:48 PM »
This is my effort for my LBSCR brake van.




Offline Jon Nazareth

Re: Hasp and Staple
« Reply #12 on: January 19, 2018, 06:11:12 PM »
Wasn't sure if that would work so, here's another.  As you can see, it has no roof......yet.

Jon




Offline Jon Nazareth

Re: Hasp and Staple
« Reply #13 on: January 19, 2018, 06:13:24 PM »
Somehow it was chopped, I'll try again

Offline Jon Nazareth

Re: Hasp and Staple
« Reply #14 on: June 09, 2018, 01:10:19 PM »
Getting there  :)

Jon