Author Topic: GWR Saddle Tank  (Read 2255 times)

0 Members and 1 Guest are viewing this topic.

Offline 753

Re: GWR Saddle Tank
« Reply #30 on: Nov 03 2020 15:48 »
Another useful way to operate a CNC mill is to run the axis only with the spindle static. By grinding up different tool shapes such as a graver you can cut very fine lines or designs.
One example is loco springs, the leaves were cut with the tool shown a reground 1.5mm end mill on a 6mm shank, the profile then cut with a 2mm end mill.

Mike