The Forum for Gauge 3 Model Trains

In the Clubroom => What's Missing in G3? => Topic started by: Richard T on Aug 23 2017 13:24

Title: 3D printed products
Post by: Richard T on Aug 23 2017 13:24
I think it is a little unfair when a manufacturer announces a range of new 3D printed products, only to have them written off by the only person allowed to reply to the thread.
Just because They don't fit in with "Monkton Priors"
I have bought some of Gavin B's  products and can thouroughly recommend them
Title: Re: 3D printed products
Post by: John Candy on Aug 23 2017 15:33
Richard,

Point taken but it was not my intention to put a "downer" on them.
They are nice items (as I said) but I simply explained that they are a bit too "modern" to fit in with the period I model. Not intended as a criticism, just an explanation/comment.

Regards,
John.




Title: Re: 3D printed products
Post by: Gavin_B on Aug 23 2017 20:24
Hi,

Thank you for your nice comments Richard, its always good to hear.

John I can take a look at the AWS gear assuming Keith Smith has not already done it.  Do you have any links to drawings or clear photos?

Gavin
Title: Re: 3D printed products
Post by: John Candy on Aug 25 2017 19:17
Hi Gavin,

This is the clearest photo I have found of the GWR pick up gear, it is taken from a 1930's photo of a Dean Goods.

The support framework was different according to class of loco but the lower part with the electro magnetic bits was the common factor.

I will make some enquiries to see if I can get a drawing.

Regards,
John.
Title: Re: 3D printed products
Post by: Doddy on Aug 26 2017 08:52
These NRM drawings might help with the ATC shoe apparatus?

No# 112 105612 1938/08/xx
Details for ATC shoe apparatus, types A & B

No# 112 105742 1937/02/xx
Rocking lever etc for ATC shoe apparatus, types A & B

No# 112 128804 1950/01/xx
Modified electrical ATC pipe details

No# 112352 1938/10/xx
Detail of carrying plates for ATC apparatus (class 2201, 3600, 3700, 5700, 7700, 8700, 9700 & 9400

No# 96860 1951/01/xx
3-position indicator case - ATC

No# 113139 1939/03/xx
ATC alarm support bracket

No# 104727 1934/12/xx
Springs for Electro Mechanical ATC Apparatus
Title: Re: 3D printed products
Post by: John Candy on Aug 26 2017 12:48
Thanks Doddy,
I will look into those leads.
Regards,
John.
Title: Re: 3D printed products
Post by: John Candy on Sep 04 2017 00:36
Gavin,

Attached are extracts from the Dean Goods GA dated April 1940 showing the ATC pick-up shoe.

Regards,
John.
Title: Re: 3D printed products
Post by: Gavin_B on Sep 05 2017 09:59
Thanks John,

I think I can do the shoe from those drawings but its not that clear how it attaches to the buffer beam,  will continue searching for pictures.

It is on my list to do

Gavin
Title: Re: 3D printed products
Post by: LankyTank on Sep 05 2017 15:48
Gavin

Had a small jiffy bag drop through the letterbox - do I owe you??

Thanks
Barry
Title: Re: 3D printed products
Post by: Gavin_B on Sep 06 2017 10:51
Of course not Barry,

Hope you like.

Gavin