• Welcome to The Forum for Gauge 3 Model Trains.
 
The Gauge 3 Society       2.1/2 inch Gauge Association       Cookies and privacy HOW TO JOIN: to request forum membership please click here

Gauge 3 Society members must be logged in to view the Society section
  G3 Clubroom

Welcome to the G3 Clubroom. This is the friendly online forum where members share ideas and inspiration, suggestions and advice, modelling tips, pictures and drawings, and general chat about our fine hobby of Gauge 3 railway modelling. A warm welcome, and enjoy your visit here today.

Scratchbuilding an LNER 12T Open

Started by Josef, Nov 07 2026 15:19

« previous - next »

0 Members and 0 Guests are viewing this topic.

Josef

Hi all, here's my first attempt at a scratch built LNER standard open goods. My Dad and I have previously built a fair number of 16mm narrow gauge wagons, but this is the first try at matching a prototype, and doing the more fiddly things like actual brake gear!

It started off with spotting a chassis on eBay. The seller mentioned the parts were older Brandbright bits. In the end it was £33.51 delivered, which is not bad for wheels, axle boxes, w irons and couplings, plus a chassis!


Chassis as delivered.

Of course, it couldn't be that easy. Closer inspection revealed the chassis was not square.



So I stripped it right down to the component parts, squared everything up, and started from the beginning!



As I figured out that the axle boxes were LNER standard ones, I decided to build the ubiquitous LNER open wagon (and co-incidentally Dad is building the modern Brandbright version). So I started off with a body of 3mm ply.



Followed by detail from scrap brass, tin can sheet, plasticard, brass rivets and bolts, and card from a 1977 Triumph Spitfire water pump box!





I also dived in to a bit of CAD, drawing up and etching some works plates, and giving myself a crash course in 3D modelling to design some suitable buffer guides. The brake gear (and buffers) is all Mike Williams' bits, with adaption to represent Morton gear with a cross shaft.



For paint, I resurrected some old airbrush skills to spray a coat of Phoenix's LNER wagon grey, and brought some Humbrol matt 33 back from the brink to do the running gear. Then hand lettered the sides using a magnifier and an adaption of a sign writing technique. The lettering was designed in Inkscape and printed. Then I poked holes all around the outlines with a pin, placed the patterns in position and tapped them with a cut down climbing chalk bag. This leaves a faint chalk impression to follow with the brush. It's come out OK for a first attempt.




Ex-works photo, just before I have a go at some weathering.


hornbeam


Josef

Thanks!

So I tried out a bit of weathering over the weekend, which has been made much less apparent by the varnish I've used. But oh well, I shall know for next time.

First off was a wash over with very, very dilute Citadel Abaddon Black, with a drop of their Chestnut Ink added. Then a light dry brush over the ironwork with Tamiya Neutral Grey. I then managed to resurrect some Railmatch Light Rust and made a very dilute mix of that to dab round the bolt detail and run down the edges of the ironwork. I tried out some washes on the under frame, but nothing looked all that good, so I settled for a dry brush over with the main body colour. With all that done, I got the airbrush out again, turned the wagon over, and gave it a light dusting of Humbrol Kakhi (again, saving an ancient tin!) focussing on the underside to simulate dirt being thrown up from the track. After that all dried I gave it a coat of rattle can matt varnish. This, as above, rather removed the effect of the weathering, and I'm not so keen on the finish it gave either. Anyway, one down, on to the next project!




And a comparison with the in-progress 13T Brandbright version.


LankyTank

Good save there, Josef, nicely done. Is that a van peering into the right hand edge of one of the photos?

Josef

@LankyTank thanks, and nope the other vehicle you can see the edge of is the 13T Brandbright LNER open.